Water Heater Repair Parker

Energizing Hot Water Showers Await You in Parker, Colorado

A tiresome day calls for a hot water shower to energize yourself and discard the clutter of a stressful day. A fully functioning water heater is exactly what you need to fulfill this dream. What happens when this device is not operating correctly? 

Our plumbers at Todd’s Water Heater Repair come to the rescue. They are always willing for a water heater replacement in Parker. Our services are also well-known in Denver, Lakewood, Thornton, Westminster, Centennial, Aurora, Arvada, Highlands Ranch, Littleton, Englewood, Broomfield, Boulder, Golden, and Highlands Ranch. 

Different Types of Water Heaters Explained 

If the terms solar, electric, on-demand, storage tank, gas, conventional, and tankless water heaters leave you perplexed, let us walk you through the many water heater types available.

Tankless Water Heater 

Tankless water heaters, as the name implies, do not use a tank to heat the water. Instead, there are coils that become extremely hot when filled with water, providing immediate results.

Tankless water heaters are among the most efficient, swiftly heating enormous quantities of water. With these in place, you can have an infinite supply of hot water on demand. No more shivering in a cold shower on a chilly day, regardless of the style of shower you have in your home.

A tankless water heater installation Parker can run on both gas and electricity. Smaller ones often use the former, while bigger ones use the latter. Your energy requirements will vary based on the size and source of the power of your heater.

Traditional Storage Tank Hot Water Heater

Conventional or classic storage-tank water heaters were the first types of water heaters to enter the market, and they are the most prevalent form of heater out there, and most likely the one you are using at home right now.

Water heaters with tanks, as the name implies, have a storage tank with a set capacity where the water is kept while it is heated. As a result, the amount of hot water accessible is directly proportional to the size of the heater’s tank, making proper sizing crucial.

Traditional heaters have two valves for temperature and pressure control. The former opens only when there is a need to release heat or moderate temperatures once the water reaches 120 degrees Fahrenheit, whilst the latter opens when the pressure drops to 150 PSI. 

Heat Pump Water Heater 

These heaters, also known as hybrid electric water heaters, can help you save a lot of money on your electricity bill because they don’t use direct heat generating, which means they use less energy.

Instead, these heaters absorb heat from the air or the ground and transfer it to the water being heated. As a result, the electricity only comes on when heat is transported from the source (in this case, the ground or air) to the water tank.

As you may have guessed, this eliminates the heater’s need for entire reliance on energy. In terms of numbers, this means that a heat pump water heater uses 60% less energy than a traditional water heater.

Condensing Hot Water Heater 

Condensing water heaters, also known as condensing boilers or gas water heaters, are another energy-efficient water heater that runs on gas and captures and uses the surplus gasses to heat water.

They store the heat extracted from the hot exhaust gas discharged via the flue and use it to pre-heat the water in the boiler.

Condensing water heaters, like conventional heaters, have storage tanks. These heaters catch flue gas, which is blown via a coil at the heater’s base (the placement also works to heat incoming water).

These heaters are a wonderful choice for people who need up to 55 gallons of hot water at once. If your home is powered by natural gas, a condensing water heater will save you money on electricity.

Solar-Powered Water Heater

Our professional plumber believes that solar-powered heaters are one of our favorites because they are both environmentally friendly and energy-efficient. They get their energy from the sun.

If you acknowledge that alternative energy is the way of the future and have or want to install solar panels in your home, there’s nothing like a solar-powered water heater to meet your hot water needs.

The heat absorbed by the solar panel’s cells is transported through the closed-loop system’s heat-conductive material, which eventually reaches the tank and heats the water.

Because it relies on sunshine, this sort of heater is only suitable for those who live in sunny climates. These hot water heater solutions can help such people save a lot of money on their electricity bills. 

Combined Space and Water Heating Systems

Hydronic boilers are available with or without combined space and water heating systems. These are an excellent alternative to forced-air furnaces, as they use a hydronic air handler with big coils for heat transmission and hence area heating.

These heaters are ideal for homes with minimal heating demands, as they provide increased insulation, space efficiency, and less air leakage. It will be sufficient to use a single unit, conserving both energy and space.

Both your area and your water are heated using these heaters, however, their effectiveness in heating one does not necessarily match its efficiency in heating the other. You are also conserving both money and energy. 

Hydronic Boilers

These heaters, also known as segregated heating systems or combi-boilers, have hydronic boilers and heat transfer via a heat exchanger. These are available with or without tanks.

Regardless of the temperature of the incoming water, the flow control valve maintains a constant temperature. As a result, you have a sufficient supply of hot water at consistent temperatures.

The excellent thing about these heaters is that, with proper care, they may last between 10 and 15 years. You won’t have to buy parts separately because of the small design with built-in parts.

Point-of-Use Water Heater

These are little heaters that are placed near the water supply. Point-of-use heaters, which can come with or without tanks, provide hot water away from the central heating unit.

These types of water heaters are also useful as backups when the primary heater is powered by gas or electricity rather than solar energy.

These heaters are popular with hot tubs, guest bathrooms, and fixtures that use less than 20 gallons of hot water per day since they allow you to lower the temperature setting on a central tank water heater.

Smart Water Heater

Smart water heaters might be a tankless system or a thermostat that works in tandem with your existing heater.

These systems can also connect to Wi-Fi, save energy by monitoring and regulating temperature, prevent water damage by detecting leaks, eliminate bacteria in the water heater by cycling water temps, and some can even replace water softeners.

These forms of water heaters are costly and require professional hot water heater installation.

Such complex systems call for expert hot water heater replacement Parker and hot water heater repair Parker. 

Ways to Keep Your Water Heater Running at Its Best

As per our expert plumber, here are three ways to maintain your water heater:

  • Do a Mini-Flush: Remove the sediment from the bottom of the tank to prevent rust and corrosion, as well as to increase the unit’s energy efficiency. Although a complete flush of the water heater tank is ideal, it necessitates the water heater is turned off. A mini-flush is effective, takes a fraction of the time, and maybe performed while the water heater is on.
  • Monitor the T and P Valve: Your water heater’s temperature and pressure (T&P) relief valve is an important safety feature. When it detects a dangerous accumulation of pressure or an abnormally high temperature inside the water heater tank, it immediately opens to release the pressure. A water heater is at risk of exploding if the T&P valve isn’t working. As a result, makers of water heaters recommend monitoring the T&P valve once a year.
  • Lower the Water Heater Temperature: Water heaters are usually adjusted to a temperature of 130 to 140 degrees Fahrenheit when they are installed. The US Department of Energy advises a setting of 120 degrees Fahrenheit for most houses, claiming that this can save over 5% on water heating expenditures. Lowering the temperature also reduces the risk of scorching and slows the buildup of mineral deposits in your water heater tank.

Why Trust Todd’s Water Heater Repair?

At Todd’s Water Heater Repair, nothing is more essential to us than our customers’ welfare during a crisis. Whether it is a Parker water heater replacement or a Parker water heater repair, we are ever ready to give a pleasant plumbing experience quickly and at a fair price.

Todd’s plumbers are on a mission to provide the best service and experience to every one of our customers, with the goal of serving the community. We make every attempt to be available when you need help. We provide same-day plumbing service, competent and trained technical support, 24-hour customer service, and cost-effective solutions during emergencies. 

We understand the importance of your water heater and offer instant water heater installation, water heater repair Parker, and water heater replacement Parker services. Supreme quality water heater services are just a call away. 



Location:

Parker, CO

Hours of Operation:

Sunday 8AM-8PM
Monday 8AM-8PM
Tuesday 8AM-8PM
Wednesday 8AM-8PM
Thursday 8AM-8PM
Friday 8AM-8PM
Saturday 8AM-8PM